Volume 3, Issue 1 (March 2018)
J Environ Health Sustain Dev 2018, 3(1): 481-487 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Khoshnamvand N, Bazrafshan E, Kamarei B. Fluoride Removal from Aqueous Solutions by NaOH-Modified Eucalyptus Leaves
. J Environ Health Sustain Dev 2018; 3 (1) :481-487
URL: http://jehsd.ssu.ac.ir/article-1-103-en.html
URL: http://jehsd.ssu.ac.ir/article-1-103-en.html
Nutritional Health Research Center , Lorestan University of Medical Sciences, Khorramabad, Iran.
Abstract: (2686 Views)
Introduction: Fluoride (F) and its compounds are widely used in industries in which fluoride overdose leads to various detrimental diseases. In this study the effect of NaOH-modified Eucalyptus leaves on fluoride removal from aqueous solutions as a natural adsorbent was investigated.
Materials and Methods: The focus of this study was on the effects of parameters such as pH (2-12), initial concentration (5-30 mg/L), adsorbent dose (0.1-1 g/L) and temperature (25-45 0C). Fluoride residual was measured using the SPADNS method by a DR 5000 spectrophotometer.
Results: The maximum adsorption capacity, at pH 2 was found to be 97 mg F/g with an adsorbent dosage of 0.5 g/L and an initial fluoride concentration of 20 mg/L. The adsorption equilibrium and kinetic data were in good agreement with Langmuir Model (R2 = 0.967) with qmax = 298 mg/g and pseudo-second order reaction (R2 = 0.999).
Conclusion: Based on the results, NaOH-modified eucalyptus leaves were found to be able to remove fluoride from aqueous environments with good removal efficiency and adsorption capacity.
Materials and Methods: The focus of this study was on the effects of parameters such as pH (2-12), initial concentration (5-30 mg/L), adsorbent dose (0.1-1 g/L) and temperature (25-45 0C). Fluoride residual was measured using the SPADNS method by a DR 5000 spectrophotometer.
Results: The maximum adsorption capacity, at pH 2 was found to be 97 mg F/g with an adsorbent dosage of 0.5 g/L and an initial fluoride concentration of 20 mg/L. The adsorption equilibrium and kinetic data were in good agreement with Langmuir Model (R2 = 0.967) with qmax = 298 mg/g and pseudo-second order reaction (R2 = 0.999).
Conclusion: Based on the results, NaOH-modified eucalyptus leaves were found to be able to remove fluoride from aqueous environments with good removal efficiency and adsorption capacity.
Type of Study: Original articles |
Subject:
Special
Received: 2017/10/31 | Accepted: 2018/01/20 | Published: 2018/03/14
Received: 2017/10/31 | Accepted: 2018/01/20 | Published: 2018/03/14
Send email to the article author
| Rights and permissions | |
 |
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |
